iPad Ground Station (for Planning Precision Flights)
DJI Lightbridge (for HD FPV Flight)
iOSD (for Real-Time Flight Data Display)
CREATE ASTONISHING AERIALS
The Phantom 2 is unbelievably easy to fly. Combined with smooth, stabilized footage from the H3-2D, H3-3D or H4-3D gimbal, aerial cinematography and videography has never been easier. It’s light, rugged and perfect for travel.
Requires Zenmuse H3-2D, H3-3D or H4-3D, video downlink and monitor.
REAL FLIGHT AT YOUR FINGERTIPS
See what the camera sees and lose yourself in picture quality so good it will feel like you’re in the sky yourself.
Requires DJI Lightbridge, iOSD mini or iOSD MK II, video downlink and monitor.
DJI LIGHTBRIDGE SOLUTION
The DJI Lightbridge 2.4G full HD digital video downlink features a native OSD system that needs no additional equipment, for an all-in-one FPV experience. Once connected, you can control your flight controller through its built-in 2.4G remote control link or DJI 5.8G remote control.
DJI IOSD SOLUTION
Install an iOSD MK II or iOSD mini to see real-time flight data.
Program your flight path from an iPad with the 16 waypoint Ground Station system, to shoot with more precision than ever. (Requires DJI 2.4G Bluetooth(R) Datalink.)
LIGHTWEIGHT, EASY TO CARRY
WEIGHT1000 g; DIMENSIONS (CM): 29 x 29 x 18; FLIGHT TIME: 25 mins
Technology: ALL-IN-ONE NEW DESIGN
Micro USB Port
CAN-Bus Expansion Module
INTELLIGENT, LONG LASTING BATTERY
The high capacity, high performance 5200mAh Lithium Polymer battery offers up to 25 minutes of flight time. It provides battery capacity data, over charge/discharge protection, as well as maintenance reminders making the battery extremely safe and reliable.
The upgraded remote control comes with many new features. A gimbal control dial, trainer port, built-in rechargeable LiPo battery with a capacity of 2000mAh, battery level LED indicators and throttle locking feature that holds the throttle stick in place when descending are all included. The new remote control is compatible with the Phantom 2 Vision+ and Phantom 2.
Use DJI Lightbridge to control your aircraft or connect the remote control to your computer via the trainer port to run a simulation application and practice your flying skills. Gimbal Control - Battery Life - Trainer Port
New motors, propellers, and ESCs combine to give you greater thrust and control than ever before. You can load more equipment on your Phantom, and achieve up to 200g/arm of extra thrust when using a 3S LiPo battery with this completely new system.
A new, anti-static compass has been developed, with a protective shell to help shield it in any flight conditions.
EASY BATTERY REPLACEMENT
Integrated battery compartment allows battery changes in a matter of seconds.
PRECISION FLIGHT AND STABLE HOVERING
An integrated GPS auto-pilot system that offers position holding, altitude lock and stable hovering allows you to focus attention to be focused on shooting.
AUTO RETURN-TO-HOME /ONE-KEY GO-HOME
If the Phantom 2 and its controller are disconnected during flight, the system’s failsafe protection will activate, automatically telling and if the signal is good enough, the Phantom 2 to return home and land automatically.
You can also setup a One Key Go Home function to activate this feature manually.
Out of Range - Return to HomeHome - PointControl Range
NO FLY ZONES FEATURE
In order to increase flight safety and prevent accidental flights in restricted areas, the new firmware for the Phantom 2 series includes a No Fly Zone feature.
These zones have been divided into two categories: A and B. For a full explanation of the difference between the categories and to view a complete list of places included, please click here.
- Ready to Fly, Multifunctional Quad-rotor System
- Customized H3-2D and H3-3D Gimbal Support
- Precision Flight and Stable Hovering
- 25min Flight Time & Smart Battery
- Auto Return-to-Home & Landing
- Advanced Power Management
- Intelligent Orientation Control (IOC)
- Easy Battery Replacement
- Self-tightening Propeller
- Video Downlink Support
- CAN-Bus Expansion Module
Weight (Battery & Propellers Included): 1000 g
Hover Accuracy (Ready To Fly): Vertical: 0.8 m; Horizontal: 2.5 m
Max Yaw Angular Velocity: 200°/s
Max Tilt Angle: 35°
Max Ascent / Descent Speed: Ascent: 6 m/s; Descent: 2 m/s
Max Flight Speed: 15 m/s (Not Recommended)
Diagonal Length: 350 mm
Flight Time: 25 mins
Take-Off Weight: ≤1300 g
Operating Temperature: -10°C ~ 50°C
Supported Battery: DJI Smart Battery
DJI Smart Battery
Type: 3S LiPo
Capacity: 5200 mAh, 11.1V
Charging Environment Range: 0℃ to 40℃
Discharging Environment Range: -20℃ to 50℃
2.4GHz Remote Control
Operating Frequency: 2.4 GHz ISM
Communication Distance (Open Area): 1000 m
Receiver Sensitivity (1%PER): -97 dBm
Working Current/Voltage: 120 mA@3.7V
Built-In LiPo Battery Working Current/Capacity: 3.7V, 2000mAh
ZENMUSE H4-3D GIMBAL
Fly with your GoPro
Works with the GoPro® Hero4 Black camera.
Forget shaky, unusable aerial footage. Fly your GoPro® Hero4 Black with the Zenmuse H4-3D gimbal and capture smooth, stable content like never before. Your camera is stabilized to prevent unwanted roll, tilt, and pan motions, giving you the confidence to fly difficult maneuvers and get the shots you want.
EASY TO SETUP
Simply mount the gimbal to your flight platform, attach your camera, and
you’re ready to fly. Your H4-3D gimbal is calibrated and pre-programmed to
work right out of the box.
TRUSTED ZENMUSE TECHNOLOGY
DJI’s Zenmuse technology is the most trusted among filmmakers worldwide
when it comes to aerial camera stabilization. Our patented sensors,
advanced algorithms, and custom-built gimbal motors give you
unmatched stability and reliability in the air.
Forget shaky, unusable aerial footage. Fly your GoPro® Hero4 Black with this gimbal and capture smooth, stable content like never before. Your camera is stabilized to prevent unwanted roll, tilt, and pan motions, giving you the confidence to fly difficult maneuvers and get the shots you want.
EASY TO SETUP
Simply mount the gimbal to your flight platform, attach your
camera, and you’re ready to fly. Your H4-3D gimbal is calibrated
and pre-programmed to work right out of the box.
The H4-3D is compatible with most DJI platforms, including the Phantom 2 and Flame Wheel systems with the A2, WooKong-M, or NAZA-M flight controllers.*
*The H4-3D gimbal comes customized for the DJI Phantom 2. If you want to use it with the DJI Flame Wheel or other platform with DJI flight controllers, the independent GCU module is required. Note NAZA-M LITE is not supported, and a NAZA-M V2 PMU must be used if using a NAZA-M V1 flight controller.
TRUSTED ZENMUSE TECHNOLOGY
DJI’s Zenmuse technology is the most trusted among filmmakers and enthusiasts worldwide when it comes to aerial camera stabilization. Our patented sensors, advanced algorithms, and custom-built gimbal motors give you unmatched stability and reliability in the air.
Camera stabilization is impossible without tracking how your aircraft is being tilted and moved in real time. That’s why the H4-3D has its own integrated Inertial Measurement Unit (IMU) constantly collecting precise information and feeding it to the gimbal. This IMU tells the gimbal exactly how you’re moving in the sky and how much countering force is required to keep your camera still, every millisecond.
SMALL, LIGHTWEIGHT, DURABLE
Engineered to add a minimal amount of payload weight to your flight platform, the H4-3D maximizes flight time without sacrificing quality. By combining a compact yet high strength aluminum body with a high level of durability, you fly knowing that your camera is secure.
DJI is constantly working to improve your experience and help you get the most out of your systems. Free firmware updates are available for your H4-3D at the click of a mouse and ensure you are at the forefront of this technology.
OPTIONAL GCU MODULE
The Zenmuse H4-3D gimbal is customized for the DJI Phantom 2 and does not include the optional Gimbal Control Unit (GCU). If you want to use your H4-3D with other DJI flight controllers and flight platforms, the independent GCU module is required and sold separately.
Specifications: General Features: - 3-axis gimbal - High precision brushless servo control - Aluminum alloy body - Built-in IMU module - Light-weight - A2, WKM, NAZA-M, NAZA-M V2 ,PHANTOM 2 supported - GoPro Hero4 Black supported - Zenmuse technology
Supported Camera: GoPro Hero4 Black
GCU Input Power: 3S~6S LiPo (12V~26V)
Assistant Software System Requirement: Windows XP SP3; Windows 7; Windows 8