Produse
   Avioane
   Zmee
   Gimbal
   Baterii
   Diverse
   Placaj
   Airsoft
   Adezivi
   Diverse
TOP
Sistem radiocomanda Futaba T14SG Telemetrie 2.4GHz FASSTest Cod CB14SG
Radiocomenzi Radiocomenzi FUTABA Sistem radiocomanda Futaba T14SG Telemetrie 2.4GHz FASSTest
Pret: 2559.00 Lei
In stoc
Cumpara
Futaba T14SG 2.4 GHz Telemetry FASSTest Radiocontrol System
All in One, and Futaba Quality.
Fully expanded 14-channel hand-held transmitter with top-class performance and integrated telemetry function, exploiting 2.4 GHz FASSTest technology.
 
The T14SG exploits Futaba FASSTest technology to provide optimum transmission security and a direct, ultra-precise sensation of control. Combine all this with a comprehensive array of functions and the usual high Futaba quality, and the T14SG is the perfect transmitter for all demanding pilots. 
The re-designed transmitter case is now larger, lies comfortably in the hands, and provides a control layout of outstanding ergonomic efficiency. The large, centrally positioned, high-resolution, backlit 128 x 64 dot graphic screen ensures good legibility in all light conditions. The graphic user interface, with the renowned simple Futaba menu structure, makes the unit very simple to operate. The menu system can be displayed in any of 9 languages.
The unit's clean, elegant lines are made possible by the new Cap-Touch system. Zero-contact sensors acting as a 3D hot-key allow a smooth, sealed surface without any projecting controls. Experience the new sensation of control using the special precision dual-axis stick units, with digital trims and trim value memory. The side-mounted rotary controls provide a practical means of operating auxiliary functions without taking your fingers from the sticks.

Highlights:
- FASSTest® 2.4 GHz technology
- Combined advantages of DSSS and FHSS modulation for superior interference rejection
- Future-proof (already meets the new EU norm)
- Telemetry
- 32-channel telemetry system
- Up to 1000 m telemetry range
- Real-time display on large integral screen
- Speech output*
- Melody and sound output
- Vibration alarm
- Data recording* of control signals and telemetry data
- Large (74 x 38.5 mm) backlit screen (128 x 64 dot)
- S-BUS technology for fully digital inclusion of S.BUS servos, S.BUS speed controllers and S.BUS sensors
- Fully expanded 14-channel transmitter with 20 freely programmable control elements
- Precision stick units with Open-Stick mechanism and 12-bit resolution
- Zero backlash
- Ballraced
 
*Hardware prepared for speech output and data recording, function to be implemented by free software update, available 02/2013
 
Transmission:
- 14 channels
- FASSTest® technology(Futaba Advanced Spread Spectrum Technology)
- The FASSTest® Hybrid technology combines the advantages of DSSS and FHSS Modulation. Extreme channel spread (spread factor 11) with DSSS Spreading, combined with optimised FHSS frequency hopping, produces outstanding interference rejection and ultra-fast response speeds for a direct, precise sensation of control.
- 100 mW transmitter power
- Real-Time-Response
- The latency (delay between moving the stick and the servo’s initial movement) of the FASSTest® / FASST system is significantly faster than other 2.4 GHz systems.
- Very long range >3000 m
- Ultra-fast, direct, fully digital modulation for extremely direct response
- Switchable FASSTest® High-Speed mode for ultra-fast digital servo response and 6.3 ms frame rate (12-channel, reduced telemetry functions)
- Easy Link - extremely simple, high-speed binding process between transmitter and receiver
- Extremely fast, reliable automatic re-binding even under difficult conditions
- Intelligent servo timing for simultaneous servo movement, prevents differential servo response
- Dual Antenna Diversity – lightning-fast switching between two receiver aerials for optimum reception signal quality (according to receiver)
- Pre-Vision – FASST / FASSTest® receivers constantly scan the input signal, and apply intelligent Futaba error correction.
- No loss of response speed even when frequency band is densely occupied
- Integrated range test function for checking effective range before launching
Modulation switchable to FASST or FHSS for downward compatibility with existing Futaba components
 
Telemetry:
- Synchronised bi-directional communication between transmitter and receiver, with high telemetry data rate (max. 9 times per second)
- 32 telemetry channels
- Max. 1000 m telemetry range
- Real-time display of telemetry data on integral screen
- Speech output controlled by user-selectable switch *
- Melody and sound output (for differentiated vario information)
- Vibration alarm
- Data recording of control signals (stick movements) and telemetry data on SD card*
- PC analysis software for recorded telemetry / GPS data and control signals**
- Receiver signal strength indicator for monitoring range
- Range warning system (with optional GPS sensor) for safe flying close to the limits of vision
- Receiver low voltage warning system for monitoring the receiver battery
- Freely configurable output of telemetry data via screen, sound, speech and vibration
 
*Hardware prepared for speech output and data recording, function implemented by free software update available as of 02/2013
**in preparation 
 
Ergonomics:
- Precision stick units with 12-bit (4096-step) resolution for accurate, ultra-fine control
- The "Open-Stick" mechanics of the stick units are ballraced and virtually devoid of backlash
- Large, high-contrast 74 x 38.5 mm backlit screen (128 x 64 dot) for excellent legibility even in strong sunlight
- Graphic user interface and intuitive Cap-Touch control wheel (with button lock) for simple operation of all functions
- 9 languages available: German, English, French, Italian, Spanish, Czech, Russian, Japanese and Dutch
- Uniform, intuitive Futaba method of control for simple switch-over
- Freely assignable transmitter controls
- Freely assignable channel sequence
- Fully expanded, with 20 transmitter controls: 7 switches, 1 button, 2 front-face rotary controls, 2 side-mounted rotary controls
- 2 lateral rotary controls provide a practical means of operating auxiliary functions without releasing the sticks
- Freely selectable trim controls for all transmitter controls (including switches etc.)
- Hardware reverse for all transmitter controls and switches, allowing any preferred direction of switching
- Direct choice of model memory in start-up display for rapid model selection
- Switchable stick modes; 1 - 4 available
 
Trainer function:
- Using optional lead or radio module
- with individual function transfer (teacher can transfer individual functions to the pupil) and mix-mode operation (teacher can override all functions)
- Freely configurable Trainer channel assignment
 
S.BUS technology:
- Digital BUS technology for modelling
- Pioneering serial control bus
- Fully digital inclusion of S-BUS components such as S.BUS servos, S.BUS speed controllers and S.BUS sensors
- S.BUS1 and S.BUS2 (bi-directional) compatible
- Allows ideal positioning of all components, with efficient wiring
- Future-proof digital technology for all future Futaba components
- S-BUS components can be programmed and registered directly via the transmitter
- Serial digital signal - ideal for flybarless systems, gyros and battery backers
 
Functions - General:
- 30 integral model memories, infinite expansion possible using SD cards (max. 2 GB, SD and SD-HC), 3862 models per optional 2GB SD card.
- Model memories from T8 or FX-20 transmitters stored on SD card can be read directly into the T14SG
- Graphic servo monitor provides a clear display of all servo travels including servo test function
- Broad receiver voltage range from 3.6 V to 8.4 V allows wide choice of receiver battery types
- Future-proof design, as software can be updated by SD card.
- Practical, thoroughly tested mixer menus for programming all servos and mixer functions according to model type, e.g. wing mixers
- Special model type specific mixer programs for:
- Power models (2 - 6 wing flaps),
- Model gliders (2 - 8 wing flaps),
- Model helicopters (6 swashplate types) (more information: see “Functions in Detail”)
- 5 flight modes (Heli and Glider menu) for each model memory, freely programmable for optimum flight mode settings - flight mode switching with priority and switching delay for smooth transitions
- Programs for all tail types: normal, V-tail, delta, flying wing, separate elevators (ailvators)
- Servo travel adjustment with Limit function for all proportional channels
- Servo reverse and centre offset for channels 1 - 12
- Trim controls optionally flight phase specific
- Trim value display in Steps or %, with zero setting through trim memory
- Fail-safe setting and battery fail-safe setting
- 2 operating hours counters, one of them model memory specific
- 2 freely configurable stopwatches with memory function
- Switchable large-type stopwatch display
- Function button lock prevents accidental inputs
 
Functions in detail 
Power model functions:
Comprehensive mixer menus for models with up to 6 wing-mounted servos. In addition to the choice of wing type, the user can select from the following tail variants: normal, separate elevators with aileron function (ailvator) and V-tail. Deltas and powered flying wings with 2...6 wing-mounted servos are also available. These mixer menus are pre-programmed to suit the model type, and contain all the essential mixer functions as standard. 
- 5 freely assignable and switchable Dual Rate / Expo settings.
- 5 free programmable mixers, linear or with 5-point curve, per model memory, optionally with / without trims and offset mixer.
- 5-point throttle curve
- Speed adjustment for throttle servo
- Aileron differential
- Spoiler mixer (flaperon)
- Elevator - spoiler mixer (flaperon)
- Rudder-aileron mixer
- Rudder-elevator mixer
- Snap-roll mixer
- Mixture adjustment
- Gyro settings
- Motor mixer, for 2-step motor switching, with separate speed settings for steps 1 /2 as well as forwards and backwards.
 
Glider functions:
Comprehensive mixer menus are also available for model gliders, including those with up to 8 wing-mounted servos. Optionally with or without motor. In addition to the choice of wing type, the user can select from the following tail variants: normal, separate elevators with aileron function (ailvator) and V-tail. Flying wings with 2 ... 8 wing-mounted servos can also be selected. These mixer menus are pre-programmed to suit the model type, and contain all the essential mixer functions as standard. 
- 5 flight modes per model memory, with priority allocation and variable transition delay. With logical switch function.
- 5 free programmable mixers, linear or with 5-point curve, per model memory, optionally with / without trims and offset mixer.
- Aileron differential
- Flap travel adjustment
- Aileron-flap mixer
- Aileron-rudder mixer
- Spoiler-flap mixer
- Elevator-spoiler mixer
- Flap-elevator mixer
- Rudder-aileron mixer
- Butterfly (crow) mixer with offset and delay settings
- Butterfly - elevator mixer
- Trim-mixer for aileron, rudder, and elevator, with speed setting and flight phase transition delay.
- Gyro settings
- Motor mixer, for 2-step motor switching, with individual speed settings for steps 1 /2 as well as forwards and backwards.
 
Heli functions:
The helicopter mixer menus differentiate themselves primarily in the swashplate control. All the classic linkage types are included as standard: H1, H2, HR3, HN3, H4 and the new H3 90° and H3 140° A special feature is the new form of variable pushrod travel compensation for the H3 and H4 types. This function eliminates a common problem involving unequal travels, which can result in servo damage in the long-term when travels are fairly large or asymmetrical. The speed of the pitch-axis (elevator) function can also be adjusted, in order to avoid synchronisation problems with the HR3 / HN3 120° swashplate linkage. 
- 5 freely programmable linear mixers or 5-point curves per model memory, optionally with / without trim and offset mixer.
- Swashplate mixer
- Swashplate ring mixer
- 5-point collective pitch curve, normal, idle-up 1, 2, 3, auto-rotation. With logical switch function.
- 5-point throttle curve, normal, idle-up 1, 2, 3, auto-rotation. With logical switch function.
- Auto-rotation
- Swashplate mixer (virtual rotation)
- Swashplate mixer – Throttle (linear / centre)
- Tail rotor – throttle mixer (linear / centre)
- 5-point collective pitch - tail rotor mixer, normal, idle-up 1, 2, 3, auto-rotation. With logical switch function.
- Mixture adjustment
- Gyro mixer (tail rotor) with 3 rates and fine trim adjustment
- Gyro mixer (swashplate) with 3 rates and fine trim adjustment
- Speed governor with 3 rates and fine trim adjustment

Set contents:
1x T14FG Super FASSTest® transmitter
1x R7008SB FASSTest® receiver
1x 2S LiIo 2800 mAh transmitter battery
1x Lithium 8.4 V / 500 mA mains charger
1x Switch harness






 

Produse Asociate
Piese de schimb
Produse Asociate
Produs Cod Denumire produs Pret(lei)
Stoc zero
0
Cumpara
Stoc zero
0
Cumpara
Stoc zero
0
Cumpara
Stoc zero
0
Cumpara
Stoc zero
0
Cumpara
Stoc zero
0
Cumpara
Copyright © 2013 Sierra Modellsport Home page | Despre Sierra | Contact Site produs de Alexus Art Agency
Nume Produs:
Pretul Sierra:
Pret competitor
Website-ul competitorului