Produse
   Avioane
   Zmee
   Gimbal
   Baterii
   Diverse
   Placaj
   Airsoft
   Adezivi
   Diverse
TOP
Gimbal DJI ZENMUSE Z15 pentru BLACK MAGIC Cod DJIZ15/BM
Drone Accesorii Camere video/foto si accesorii Gimbal DJI ZENMUSE Z15 pentru BLACK MAGIC
Pret: 10345.00 Lei
Stoc zero
Cumpara
DJI is announcing Zenmuse Z15 BMPCC. This gimbal is supporting Black Magic Pocket Cinema Camera with lens Olympus M.ZUIKO DIGITAL ED 12mm f/2.0 currently. It will work perfectly with S800 EVO and larger DJI airframe.



Features:
ANOTHER EVOLUTIONARY 3-AXIS PROFESSIONAL GIMBAL
The DJI Zenmuse Z15-BMPCC Gimbal, based on the technology of the Zenmuse Z15 series gimbal, marks another breakthrough in gimbal systems with an increase in performance of up to 5 times. The precision range of the control angle is within ±0.01°, and when used with DJI A2 professional flight controller and DJI S800 EVO, will remain stable and precisely with the highest level of stability in controlling any camera equipment even if the aircraft is in strong wind or at high speed.

 
CUSTOMIZED GIMBAL DESIGN FOR THE BMPCC 
In order to ensure the gimbal functions at its best and submits nothing but industry level images, DJI provides a customized Gimbal in accordance with the latest in camera technology… the Zenmuse Z15-BMPCC Gimbal is customized for the Black Magic

MULTIPLE CONTROL MODES 
The Zenmuse Gimbal system offers three types of control modes. Orientation-locked control mode, Non Orientation-locked control mode and Back to Mid-point mode (Horizontal mode). These three modes can be switched both quickly and easily to support the many different requirements of aerial photography.
 

 
3-AXIS ROTATION CONTROL 
The 3-axis Zenmuse Gimbal system has a creative mechanical design. The control method is simple and easy to use as the movement range of the transmitter stick has direct control over the relative rotation speed. The tail potentiometer greatly increases control, stability and precision, and the internal slip rings avoid needlessly complicated wiring. Both the power and signal lines are integrated into the tubes of the Gimbal, which presents a completely unhindered control axis without limitation providing a maximum Yaw of ±360°, a maximum Pitch of ±360° and a maximum Roll of ±40°.

 
BUILT-IN INDEPENDENT IMU MODULE 
Our new stabilizing algorithm represents the latest in innovation which, together with our highly-precise induction devices, provides perfect performance of attitude control. This integration means that without the requirement of extra installation and connection of extra wires, it is both easy to assemble and extremely stable during flight.
 

 
GIMBAL SERVO DRIVE MODULE 
Due to our special DJI Customized Gimbal Servo Drive Module, the Zenmuse series of Gimbals offers excellent high precision control characteristics. With high precision, low vibration and high torque characteristics, this module provides additional quality stabilizing features. 
 
HDMI-AV MODULE 
In order to minimize the payload of the aircraft, the video output module with expanded features like camera shutter is customized to transform the HDMI signal to AV with neat wiring, which ensures the smooth and free movement of the 3-
axis Gimbal. 
 
EXCELLENT CHOICE for A TOTAL SOLUTION 
The Zenmuse Gimbal system is a perfect match to Octo-copter flight platform and other DJI products such as the A2 and WooKong-M flight controllers for multi-rotor and the Ace series of flight controllers for helicopters. Combined with the 
iOSD Mark II and the 5.8G video link, all together make up DJI’s Total Solution, which allowing you to enjoy a convenient, professional and complete aerial photography experience.

Specifications:
GENERAL
Built-In Functions:
- Three Working Modes 
- Orientation-locked control 
- Non orientation-locked control 
- FPV mode (Reset) 
- Built-in independent IMU module 
- DJI gimbal special servos drive module 
- HDMI- AV module 
- Wireless video transmission supported 
- Camera shutter control supported 
- Wide range voltage input supported 
- S-Bus/PPM Receiver supported

PERIPHERAL
Supported Camera Blackmagic: Pocket Cinema Camera 
Supported Lens Currently: Olympus M.ZUIKO DIGITAL ED 12mm f2.0 
GCU Input Power: 4S~12S LiPo (Recommend 6S if with S800) 
Control Requirement: Four spare receiver channels at least 
Assistant Software System: Requirement Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)
 
MECHANICAL & ELECTRICAL CHARACTERISTICS
Working Current:
- Static current: 200 mA (@25V) 
- Dynamic current: 400 mA (@25V) 
- Locked-rotor current: 4 A (@25V) 
Operating Temperature: -10°C ~ 50°C 
Weight: 1.26 Kg 
Dimensions: 220 mm × 200 mm × 223 mm 
GCU BEC Output: 10 A@12 V 
GCU Wireless Video Transmission Power: 1 A @12 V 
GCU Weight: 63 g 
GCU Dimensions: 64.2 mm × 34.1 mm ×19.5 mm
 
WORKING PERFORMANCE
Load Weight (Reference Value): 521 g(BMPCC including storage card, battery, lens_ 
Controlled Angle Accuracy: ±0.01° 
Maximum Controlled Rotation Speed Pan axis: ±130°/s 
Tilt axis: ±130°/s 
Roll axis: ±30°/s 
Controlled Rotation Range Pan axis control: ±360° continuous rotation 
Tilt axis control: ±360° continuous rotation 
Roll axis control: ±40°
 
Copyright © 2013 Sierra Modellsport Home page | Despre Sierra | Contact Site produs de Alexus Art Agency
Nume Produs:
Pretul Sierra:
Pret competitor
Website-ul competitorului